› ›

T-TOP REPAIR HELP

Reel OutrageReel Outrage Posts: 7 Greenhorn
in Northeast General Fishing & The Outdoors #1
I have a cross brace on my t-top that has cracked just inside the weld on both ends. I have been calling around and can't seem to find anyone interested in coming out to at least give me an estimate. I have been told that they will most likely have to unhook all electronics and lift the t-top off to fix. I dont have a trailer but could prob get one if needed. Boat is a 28 Boston Whaler Outrage located at palm cove marina. Thanks.
There are those who follow their dreams and there are those who chase them down and beat them mercilessly into submission :beer
· Share on TwitterShare on Facebook

Replies

  • BoattronicsBoattronics Posts: 5,201 Admiral
    #2
    Call Adam at All Aluminum Concepts. His work is as good as it gets, and his prices are simply the best. He will have no problem coming out for a free estimate. Let me know if you need help with removing and re-installing the antennas, I will give you the best work/price for that, and my estimates are always free. Give me a ring @ 904-545-1270 and we'll get ya fixed up! P.S., Adam has mobile gear too if that is whats needed, but you'll probably save a bit if you can get it to him on old St.Augustine road.
    Tony Eden-
    Certified, licsensed and insured, Marine Electronics and rigging master, and "Dream boat" build winner with 20 years of professional experience.
    Boattronics.net
    Over 80 seperate, recent reviews from captains on this forum-
    http://forums.floridasportsman.com/showthread.php?5295-Recent-Boattronics-reviews!
    Please call with any questions or a free estimate for the lowest price/best work available!
    904-545-1270
    · Share on TwitterShare on Facebook
  • Reel OutrageReel Outrage Posts: 7 Greenhorn
    #3
    Thanks Tony. I will call you this afternoon so we can try to set something up. I have been in touch with Adam but have not been able to get him to come take a look as of yet.
    There are those who follow their dreams and there are those who chase them down and beat them mercilessly into submission :beer
    · Share on TwitterShare on Facebook
  • Whipper SnapperWhipper Snapper Posts: 576 Officer
    #4
    Give my buddy Don Frattle a shout he has one of the best alumnium welders in jax that works for him, his number is 904-412-8342, he redid my entire t top at an unbelievable price and he is also a **** good fisherman.
    [SIGPIC][/SIGPIC]
    · Share on TwitterShare on Facebook
  • KINIBKINIB Posts: 350 Deckhand
    #5
    Whipper Snapper wrote: »
    Give my buddy Don Frattle a shout he has one of the best alumnium welders in jax that works for him, his number is 904-412-8342, he redid my entire t top at an unbelievable price and he is also a **** good fisherman.

    :AgreeDefinitely call Don Frattle!!
    · Share on TwitterShare on Facebook
  • TheCaptainsTableTheCaptainsTable Posts: 557 Officer
    #6
    Thanks Tony, we will remeber you when you need some pull wire , oh by the way we have a slip in HarborTown
    · Share on TwitterShare on Facebook
  • BoattronicsBoattronics Posts: 5,201 Admiral
    #7
    TheCaptainsTable wrote: »
    Thanks Tony, we will remeber you when you need some pull wire , oh by the way we have a slip in HarborTown

    You know I love you guys too cap! Ill alternate recomendations between Custom Marine and Adam, since I know both of you do excellent work. The two most experianced t-top, tower and marine aluminum shops in N.Fl, no doubt!
    Tony Eden-
    Certified, licsensed and insured, Marine Electronics and rigging master, and "Dream boat" build winner with 20 years of professional experience.
    Boattronics.net
    Over 80 seperate, recent reviews from captains on this forum-
    http://forums.floridasportsman.com/showthread.php?5295-Recent-Boattronics-reviews!
    Please call with any questions or a free estimate for the lowest price/best work available!
    904-545-1270
    · Share on TwitterShare on Facebook
  • TheCaptainsTableTheCaptainsTable Posts: 557 Officer
    #8
    Thanks Tony ,but I was just messing with you .
    · Share on TwitterShare on Facebook
Sign In or Register to comment.