Home Boating

Interior and non-skid wax job

LAmarshLAmarsh Posts: 33 Deckhand
My 2012 Skeeter was getting very dull and faded and had some oxidation so I looked into having it professionally detailed.  After pricing it out I decided to try it myself and thought I would share for anyone looking to DIY.  

Used a dual action buffer from Harbor Freight and Meguair’s #49 oxidation remover, #45 polish and Collonite # 925 for final wax for top cap, interior sides and console.  Used foam pads for each step of the process.  Did not use the polish for the non-skid just compound and wax and used Shurhold soft buffing brush with the oxidation remover and then microfiber cloth to remove.  For final coat hand waxed with microfiber cloths.  

The process took quite some time but the results were amazing and it looks like a new boat.  

The last picture shows after to the left and before to the right.  


Sign In or Register to comment.