Replies

• thflyingclouser Posts: 52 Greenhorn

  August 2017 #2

  I like this! I'll be whipping up a few similar ones tonight.

  0 · Share on TwitterShare on Facebook
• Hambweld Posts: 218 Deckhand

  August 2017 #3

  1/0 gama ss15, ep silky rust at the bend, orange crazy legs and pearl/black legs. Ep sand 1/2" streamer brush, ep uv sand for the main body. 20# mason for the 5/32 beads. I run 2 bobbins for this. Start with Kevlar and lay a base all the way to bend, attach all parts at rear including streamer brush. Pull it out of the way then start chartreuse at the eye. wrap brush up and secure with the chartreuse. Then add ep body. spiral the Kevlar up and tease the brush out so not to trap it under. Then I'll add beads and secure mason with the Kevlar. Whip the kevlar and cut. Finish head with chartreuse and whip( can add weed guard here as well) use thin loon on head and let it soak in good. Then thick uv over top of the body. Enjoy!!
  
  
  Sent from my iPhone using Tapatalk

  0 · Share on TwitterShare on Facebook