Home Shimano

New Cumara A

bantam1bantam1 Posts: 541 Officer
Here are the specs for the new Cumara A model rods:

HM-1 graphite and TC4/HM-1 construction for crankbait model rods.
Fuji KR guide train
Custom Shimano split reel seat
EVA grips
Laser etched badge with technique specific images
Machined aluminum winding check
20 casting models
10 spinning models
Limited Lifetime Warranty and Over the Counter warranty
*Rods start shipping to the dealers at the end of November*

Casting handle

Spinning handle

We went to the HM-1 material to offer more sensitivity from the rod series. The TC4 uses the HM-1 material wrapped with 4 layers of T glass. This allows for a much lighter rod with the same benefits of our previous TC4 type rods. The HM-1 actions are very similar to the previous Cumara models. These are not Cumulus blanks. Cumara users will appreciate the actions and more power from these rods. They also have a hook keeper similiar to what is used on the NRX. If you fish T-rigged plastics, you will appreciate being able to leave the point of your hook burried in the plastic to hand it on the rod.

Of course we have technique specific actions for just about every bass application. Jig, worm, flip, punch, cranks, spinnerbaits, lipless cranks, shaky head, drop shot, tubes and umbrella rig.

The Fuji KR guide train uses the K style frames with some small changes. These were orignally designed for use with braided line to eliminate line wrapping on the frame. The new KR series offer some improvements for the freshwater rods. They combine standard and micro guides to help reduce weight. With micro guides you need more guides to control the line and keep it from contacting the blank (casting models). The benefit of these new guides (and using more guides) are more contact points along the blank which increases sensitivity. The guide design also adds lifting power to the rod. This means more hook setting power from the rod. On the spinning models you will notice increased casting distance and better line control. The way the guides choke the line and funnel it, you will notice the improvements right away. These are not your standard micro guides that you see on other rods.


    Do these guides on the spinning model have that annoying braid train sound with tension on the line?
    Everything affects everything.You can't just change one thing.Every thing is connected.
  • bantam1bantam1 Posts: 541 Officer
    Braided line will make noise going through the guides no matter what. The guide train has nothing to do with that. They do not flex like the Recoil guides which transmit a little more noise.
  • johnDjohnD WC FLPosts: 6,419 Admiral
    Sick looking rod , I'm sure y'all will sell tons of them.
  • congoman775congoman775 Posts: 1,395 Officer
    Can you use these in Saltwater?
  • redfish27redfish27 Posts: 149 Deckhand
    bantam1, question for you....I have a couple of Cumara spinning rods, the lastest is the Cumara Jig & Worm (CUS72MA)....I have it matched up with a CI4 3000 and love the outfit. I use it 100% in saltwater and it has held up great. I use very light artificial lures such as 1/16 an 1/8 jig head with plastic tails and Texas Rigged plastic worms. I am going to purchase another CI4 3000 and medium /Fast tip Cumara rod as well but wanted to know your thoughts on trying out the Cumara Drop SHop or Shakyhead model. Looks like the Drop shop is medium power with extra fast action and the Shakyhead is medium/fast action....based on the type of inshore saltwater fishign that I do, what set up would you recommend? Also, do you feel the CI4 4000 is took much reel for these rods? Is the 3000 a better match? Thanks!
  • bantam1bantam1 Posts: 541 Officer
    Yes these rods are approved for use in saltwater.

    redfish I answered your PM's with the same questions...
  • jbiblerjbibler Posts: 168 Deckhand
    Great rods... but why red????? :banghead

    Josh B.
    | Pathfinder 23 HPS | Yamaha 300 | Power-Pole | Minn-Kota | JL AUDIO | YETI |
Sign In or Register to comment.