Fishing reel knobs and handles

24567

Replies

  • triumphricktriumphrick Posts: 538 Officer
    Sorry for the late post, but didn't see your post earlier...

    I will be in the shop in the morning and can get your measurements.,...

    For the 450, I think the jumo T-bar would be a good fit....but you can get by a little cheaper with the molded knob.
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • Nb1Nb1 Posts: 21 Greenhorn
    Can you send the price and picture of the molded knob please?
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • shamalamallamashamalamallama Posts: 8 Greenhorn
    are these to big to put on a 4000 sustain rubber came off my original
  • triumphricktriumphrick Posts: 538 Officer
    I have a smaller black round knob that will fit the 4000 series reels...

    I discount the knob 10% if the work is done with a cleaning..

    A thorough cleaning on your Sustain is $23..includes all of the bearings serviced as well as the drags. I also have carbon-tex drags for only $8...
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • redjimredjim Posts: 774 Officer
    Rick, is a good fellow and does a great job!
  • triumphricktriumphrick Posts: 538 Officer
    redjim wrote: »
    Rick, is a good fellow and does a great job!

    Thanks, Jim...your gear was wrapped up and shipped yesterday!
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    Lots of handles, handle blanks (arms) and knobs in stock...gotta move them!

    10% Fla Sportsman discount if mentioned when you email me!
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • brandonlehrerbrandonlehrer Posts: 55 Deckhand
    Can you put them on for me if I buy one?
  • triumphricktriumphrick Posts: 538 Officer
    Absolutely ... PM me and I will be in touch!
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • redmarlinredmarlin Posts: 5 Greenhorn
    can I put this on a 260 slammer
  • triumphricktriumphrick Posts: 538 Officer
    redmarlin wrote: »
    can I put this on a 260 slammer

    The 260 handle diameter is probably too small to mount a new knob. It takes a 1/4" hole to mount the new one...I don't think there is enough meat at the handle end.....
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • pjstevkopjstevko Posts: 513 Officer
    What size and color knob would you recommend for a Stradic 4000FJ?

    Are there bearings on these where the knob meets the handle?
  • triumphricktriumphrick Posts: 538 Officer
    A stradic 4000 has a very narrow boss where the handle attaches...

    If you measure it and feel a 1/4" hole can be drilled in it, and still have some meat left over, then a round knob is a good addition.

    I have them in black and silver. I also carry a smaller black knob. The regular size is 1.85 inches diameter...the smaller one is 1.6 inches
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • pjstevkopjstevko Posts: 513 Officer
    A stradic 4000 has a very narrow boss where the handle attaches...

    If you measure it and feel a 1/4" hole can be drilled in it, and still have some meat left over, then a round knob is a good addition.

    I have them in black and silver. I also carry a smaller black knob. The regular size is 1.85 inches diameter...the smaller one is 1.6 inches


    Can I mail you the handle so you can look it over to see if it's doable or not?

    Obviously if you think it can be done right than I'd just have you do the install

    Let me know if you'd agree to this


    PJ
  • triumphricktriumphrick Posts: 538 Officer
    If I had the handles I would definitely know if it is doable and what knob would work better...

    I don't charge any labor for doing the install...

    Sorry for the delay in getting back to you.

    All my shipping info is on my site, in my signature..
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • pjstevkopjstevko Posts: 513 Officer
    If I had the handles I would definitely know if it is doable and what knob would work better...

    I don't charge any labor for doing the install...

    Sorry for the delay in getting back to you.

    All my shipping info is on my site, in my signature..

    Ok I'll mail you the handle when I'm home from vacation.

    Thanks

    Pj
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
  • triumphricktriumphrick Posts: 538 Officer
    btt
    [SIGPIC][/SIGPIC]
    KeyWest 268 BF 150's
    "Lisa Anne"

    "RICK'S REEL SERVICE, IT'S MORE THAN REPAIRS"

    http://RICKSREELSERVICE.COM
Sign In or Register to comment.