Corrosion Block 12 oz Aerosol - Boat Corrosion Spray - Metal Protection

All new product for Angler Systems, Inc. I've used it for years and now we carry it!

On sale for a limited time. West Marine's price is $19.49 while our sale price is just $14.95.

See @

12 oz. Aerosol

Corrosion Block is the marine version of ACF-50. It is a state-of-the-art, anti-corrosion compound specially formulated to perform in the extremes of the marine environment. Corrosion Block has five superior features:

It is a superior anti-corrosion compound. It kills corrosion in progress. It prevents new corrosion cells from forming for 24 months. It is an excellent penetrant. It is an excellent light lubricant. Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or teflon. It can be sprayed, or wiped on with a damp rag. Corrosion Block will actively penetrate the corrosion on the surface of the metal, and, in the process, isolate it electrically from the base metal. Once the Corrosion Block has penetrated into the corrosion cell, it displaces and/or emulsifies and encapsulates any moisture present in the cell and bringing it to the surface where it evaporates. Corrosion Block then fills the cell, with a 40 KV dielectric barrier to prevent further moisture contact with the base metal for up to 24 months.

Applying Corrosion Block is easy. Simply spray it on the area to be protected until it appears to be shiny. You don't need to saturate the entire surface as you do with some other products. Corrosion Block has a strong capillary action and will spread into the smallest crevices, leaving an ultra-thin film.

Corrosion Block's ability to remove moisture, combined with its excellent penetrating and strong dielectric properties, have brought a number of electronics "back from the dead" with just one application. The Corrosion Block removes the moisture from the corrosion byproduct, then isolates the corrosion by-product from the electrical circuit. Corrosion Block can be used in many different electrical and electronic applications without fear of damage. And it won't harm any plastics or painted surfaces and is actually good for rubber, keeping it from cracking and drying out.

We recommend you apply Corrosion Block during your regularly scheduled maintenance and monitor the length of protection your equipment receives. Exactly how long Corrosion Block's protection will last depends on a number of factors. Because Corrosion Block forms such an ultra-thin film, surfaces which are subjected to frequent rubbing or washing will have a relatively short re-application cycle. However, on protected internal surfaces, one application of Corrosion Block will provide protection for 24 months before the active ingredients are consumed.

Finally, Corrosion Block is virtually non-toxic and cleans up easily from hands, clothes and painted surfaces with soap and water.


Sign In or Register to comment.