Welding lower unit

Can any of you guys recommend a welding shop that could weld a small crack on my Yamaha 50 lower unit, not structural.... Just got a little carried away when removing the lower unit for a water pump:huh:nono

Thanks

Replies

  • VertigoVertigo Yankeetown, FLPosts: 612 Officer
    Depending on where and how big the crack is, you might get away with a J.B. Weld repair.
  • no-tel-inno-tel-in Posts: 11 Greenhorn
    756371305a93aa5c6590229a2f0bbdf7.jpg
    1f488c87c73039b4d6fd3c698760d2c0.jpg

    There are some pictures, any thoughts? Definitely repairable?
  • Wishin i was fishinWishin i was fishin Dunnellon FlPosts: 907 Officer
    Since you are in Ocala try these guys http://www.danneumannracecars.com/ . They have welded transmission cases for a friend of mines shop and have done good work. They are off of NE 36th ave North of Terrys's place if you are familiar with the area.
  • Fishin RodFishin Rod Posts: 2,620 Captain
    Hogan brothers in Chiefland, (352) 493-8006, ask for Larry.
    "Be what you is"....... Isaiah Minter
  • RedbonzRedbonz Posts: 4,531 Captain
    I've had Smiths welding in Ocala do all my welding on my motors...
    If it don't fit force it. If it breaks it needed replace anyways. :banghead
Sign In or Register to comment.