Something a little different...

Capt. ScottCapt. Scott Posts: 94 Deckhand
OK, here's the thing....I've become pretty unhappy with cork handles lately. The quality of pre-made handles is going down, the price is going up, the cork rings for making your own handles are ridiculously expensive and the stuff just doesn't hold up,(at least not to the rigors I and my clients put them through). So, I've been working on alternatives.....

Here's a curly maple handle I turned on my lathe, and put it on a 7'6" 4#... I think it came out pretty OK:
SH106738_zps3be35fe7.jpg
This particular handle/rod I left on the boat for over a month and paid no special attention to it. Saltwater, fish slime, suntan lotion and boat soap...still looks like I just finished it:
SH106739_zps97e72d90.jpg
I also turned a reel seat and fighting butt,(yes,I know...a fighting butt on a 4#? But I thought, what the heck...)
SH106740_zpse725890e.jpg
When I first started on this, I was told that the handle would be slippery and not only am I finding that to not be the case at all,(I actually find it less slippery than cork) but the increase in sensitivity is significant.
And here's the fun we've been having with it:
121219_0002_zps1165fa34.jpg
And this was unintentional, but it was hysterical:
SH106812_zpse7570189.jpg
I'll keep posting on the new developments as the project progresses....I have at least a 1/2 dz. rods in need of new handles...
Capt. Scott
http://www.flyfishingextremes.com

Replies

  • sunflowersunflower Posts: 413 Deckhand


    Very nice, the grain is gorgeous.

    but all wood is not made equal. I grew up on a farm where my Dad did a lot of woodwork. You might do even better with a soft wood like alder. It would be easier to work than maple, and softer and even less slippery. Or even balsa, though that might prove too fragile.

    Mark

    grace finds goodness in everything ...


    [SIGPIC][/SIGPIC]
  • Capt. ScottCapt. Scott Posts: 94 Deckhand
    sunflower wrote: »


    Very nice, the grain is gorgeous.

    but all wood is not made equal. I grew up on a farm where my Dad did a lot of woodwork. You might do even better with a soft wood like alder. It would be easier to work than maple, and softer and even less slippery. Or even balsa, though that might prove too fragile.


    Sunflower,

    Thank you, yes the grain came out nice.
    A soft wood would defeat the purpose of using a material that is able to withstand hard use. The curly maple was not hard to work with at all and as I said in the original post, isn't slippery in the least.

    Capt. Scott
  • sunflowersunflower Posts: 413 Deckhand
    By soft, I mean softer in the hand. An alder or pine handle will still be there long after you or I has succumbed to hard use.

    Mark

    grace finds goodness in everything ...


    [SIGPIC][/SIGPIC]
  • Capt. ScottCapt. Scott Posts: 94 Deckhand
    Sunflower,
    Have you ever held a wood fly rod handle? I could make wood handles out of every kind of wood you can name, and I challenge you to tell the difference by feel alone. Until you try driving a finger nail into it, it will all feel exactly the same. One will not feel harder or softer than another.
  • mastercastermastercaster Posts: 1,257 Officer
    That's awesome, wish I had the balls and knowledge to remove the cork grip from my Scott and replace it with that.
  • saltybumsaltybum Posts: 1,547 Captain
    Absoulutely beautiful. And I'm sure for the weaklings it doesn't add significant weight either.
  • bonefishdickbonefishdick Posts: 67 Deckhand
    Great job. Looks like cork at a distance and I hope it holds up over the long haul and I suspect it will. I know I have a hard time getting more than two years out of a grip because of the amount of casting and fishing I do. The cork just wears away. Your grip at least maintains a certain aesthetic appeal which is what I really like.
    "The Tug Is The Drug"
  • Carl BlackledgeCarl Blackledge Posts: 674 Officer
    Capt,

    Have you ever tried using a tennis racquet handle wrap on any of your fly rods? after about two years I took the wrap off the rod handel, and the cork was like brand new. Just a thought.

    Carl
  • acesoveracesover Posts: 550 Officer
    How does it affect the weight on the 4wt rod?
    FYIWFG
  • Bob1shBob1sh Posts: 43 Deckhand
    That is absolutely beautiful! Would you be willing to the same work on a rod of mine? What would this cost me as well? I am super impressed!
  • Capt. ScottCapt. Scott Posts: 94 Deckhand
    Mastercaster,
    If you'd like to give me a call, I'd be happy to chat with you about replacing the handle on your Scott. Modification would void any warranty though.

    Carl,
    Though I personally have not used the tennis handle wrap type material, I have several customers that do and like it. Does it need replacing after time due to salt exposure, suntan lotion, etc? I have used their rods and it has a nice feel to it. It is a good option.

    In regards to weight...I cored out the handle 5/8th of an inch and filled it with a high density, light weight foam. That dropped the weight by about 1/3rd from what a solid wood handle would have been. The current weight/feel is not noticeably heavy and has a nice "solid" feel to it. Next handle I'm going to try a 3/4 inch coring and drop the weight by about half.
  • Carl BlackledgeCarl Blackledge Posts: 674 Officer
    Captain,

    My buddy wrapped his rod with the tennis handle tape, I didn't, however I bought a rod from him that had the stuff on it, It did give the rod a good feel. I don't know how long the stuff will last in saltwater.

    Carl

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file